Click on the image to check the artwork
Oil immersed 3-phase Pad Mounted Transformer
Oil immersed 3-phase Pad Mounted Transformer are typically housed in weatherproof enclosures made of durable materials such as steel or aluminum. They are designed to withstand harsh environmental conditions including rain, snow, and extreme temperatures. The enclosure also provides safety by isolating the electrical components.
|
Power Rating |
45kVA~6000kVA |
|
Primary Voltage Ratings |
up to 35kV |
|
Secondary Voltage Ratings |
up to 24.94kV |
|
H.V. Tap Range |
±2×2.5% or others |
|
Connection Type |
Delta/Wye |
|
Winding Conductor |
Copper or Aluminum |
|
TYPE |
Loop feed/Radial feed |
|
Configuration |
Live front / dead front |
|
BIL |
30-150 |
|
Standards |
ANSI, IEEE, DOE, CSA, NEMA, UL |
|
Application |
Residential Areas, Hotels, Single Family Houses, Parks, Distribution Systems |
|
Oil Type |
Mineral Oil or Biodegradable Natural Vegetable Oil, Non PCB Fluid |
|
Finish Color |
Bell Green |
The following table is the standard parameter of Oil immersed 3-phase Pad Mounted Transformer. If you have customized demand, please contact the TRANSpower to obtain proposals and offers.
Below Specs Are ONLY For Reference.
|
Configuration |
Power |
W(mm) |
H(mm) |
D(mm) |
W1(mm) |
D1(mm) |
D2(mm) |
H1(mm) |
Weight(kg) |
|
Standard configuration |
≤125kVA |
2000 |
1582 |
1116 |
1180 |
503 |
575 |
1240 |
2000 |
|
160~500kVA |
2000 |
1580 |
1350 |
1330 |
503 |
655 |
1340 |
2950 |
|
|
630kVA |
2000 |
1710 |
1560 |
1420 |
632 |
775 |
1480 |
3400 |
|
|
800kVA |
2000 |
1710 |
1600 |
1420 |
632 |
775 |
1480 |
3000 |
|
|
1000kVA |
2000 |
1710 |
1820 |
1420 |
632 |
815 |
1480 |
4000 |
|
|
1250kVA |
2000 |
1710 |
1840 |
1560 |
632 |
795 |
1480 |
4800 |
|
|
1600kVA |
2205 |
1710 |
1920 |
1630 |
632 |
920 |
1530 |
5700 |
|
|
Extra configuration |
≤125kVA |
2200 |
1900 |
1240 |
1180 |
632 |
575 |
1240 |
2200 |
|
160~500kVA |
2200 |
1900 |
1474 |
1330 |
632 |
655 |
1340 |
3150 |
|
|
630kVA |
2200 |
1900 |
1560 |
1420 |
632 |
775 |
1480 |
3600 |
|
|
800kVA |
2200 |
1900 |
1690 |
1420 |
632 |
775 |
1480 |
3800 |
|
|
1000kVA |
2200 |
1900 |
1780 |
1420 |
632 |
812 |
1480 |
4200 |
After each unit of Pad mounted transformer manufactured, routine tests/FAT will be carried out by the requirements of ANSI/IEEE C57.12.90 and C57.12.00. The test report comply with IEEE/CSA standards, and efficiency comply with DOE 2016 Standards.
Routing Test in Our Factory
Winding Resistance Test
Insulation Resistance Test
Voltage Ratio Error Test
Short-circuit Impedance Test
No-load Loss (Wattage) Test
Load Loss (Wattage) Test
Induced Voltage Withstand Test
Separate Source Voltage Withstand Test
Pressure Integrity Test Test
We offer both online and offline test supervision options for our customers. You can also choose a third party, such as SGS, CSA, or UL to visit Transpower's factory, during the witness test, the test being executed and receive a report that fully comply with standard requirements. Alternatively, you can request online video monitoring to observe the testing process in real-time. Ensuring transparency and confidence in the testing procedures.
Our production and testing equipment have professional calibration every year.
Assembly and Packaging Area
After Assembled then Shipping by container
Our Three Phase Pad Mount Transformers can be used in variety of applications, all ranging in complexity.
Q: What Type Of Transformers Does Transpower Electrical Offer?
Q: What are the typical applications?
Industrial facilities
Commercial buildings
Utility distribution systems
Renewable energy systems (e.g., wind or solar farms)
http://www.trans-elec.com/